Vmware fusion 8.5 high sierra free. macOS 10.13 beta stops installing with error “problem with firmware”

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Ask Different is a question and answer site for power users of Apple hardware and software. It only takes a minute to sign up. Connect and share knowledge within a single location that is structured and easy to search. I would prefer this VM be created from my existing MacBook running High Sierra a real, physical device , but that’s not essential.

I have a current version v I have attempted to create a. Consequently, that option seems to be unavailable? However, when opening that file in VMware Fusion, instead of High Sierra, I get what appears to be an installation procedure. It was not clear where this was going to be installed, so I abandoned it. VMware Fusion I have not tried this utility, but am willing to try it – however I would much prefer to hear from someone who has used it successfully before I do.

VMware tech support advised of availability of a suitable file at this location hackintosh? Before they sent me the link, the VMware tech support person asked me to recite a disclaimer during our phone conversation.

This made me a little nervous I’ve tried to create a. That has been particularly confusing – partly because it seems to have wrecked the network drive location where Time Machine keeps backups for my MacBook running Catalina.

I’m afraid I am just not smart enough to use CCC. I’m probably a little frustrated at this point. My experience with cloning machines in VMware was years ago in a MS Windows environment – it was dead simple – literally a one-or-two-mouse-click operation. All help will be appreciated. Otherwise, select Install macOS and click the Continue button. Continue to follow thru as appropriate with the install of macOS until the install of the OS is finished.

As a side note, before you start the install, I’d make a copy of the virtual machine’s configuration file and a copy of Hard Disk 2 SATA the temporary installer vHDD as you might find it useful if you choose to go the cloning route.

These file are found within the document bundle of the virtual machine , e. As a result of issues the OP was having, as discussed in the comment thread, I’ve come up with a workaround that works as tested. If you’re having an issue with VMware Fusion creating the installation media you can try the following workaround. When starting the virtual machine with a raw disk VMDK you’ll be prompted with a password dialog box stating, VMware Fusion requires administrative privileges for accessing Boot Camp disks.

After the install is finished the lines added to the configuration file can be removed and reset bios. This can be done before selecting Install macOS and clicking the Continue button by using Terminal from the Utilities menu using, e. After the initial install is finished the date can be set to its proper date and the Network Adapter of the virtual machine re-connected. However, I need to say that I have not actually worked through the entire procedure given in the answer.

I got bogged down in the details of using VMware’s vmware-rawdiskCreator , and could not complete the procedure. If you care to read through the extensive comments following the accepted answer, you may conclude that the latest versions of macOS Catalina I do not understand why this is so, but I believe that it is unnecessarily difficult due to decisions made by Apple and VMware. I say this because it is easy using older versions of the software. It may be an easier approach than the accepted answer, but it requires an additional Mac with an older version of macOS, and – at least in my case – an older version of VMware Fusion.

That said, here goes:. Here’s an “official source” for this file on Apple’s website. Follow the guided process:. When the process has completed, you will see the new VM listed, and you may select it, and start it. The VM will start in a new window. Finally, copy the. Once you have the file positioned where you want it, right-click on it, and select the option to open the file with VMware Fusion.

That’s it. I’m considering writing an Epilogue to this saga to document some of the road-blocks encountered, and my questions regarding why this process was made so difficult. That’s for another day – I’m officially burned out on Catalina and VMware for now.

However, I need to say that I have not actually worked through the entire procedure given in that answer. I previously created an alternative approach first alternative approach to the accepted answer which is here. This answer – the one that follows – is a second alternative approach for meeting the objective:. Note: This may be an easier approach than the accepted answer. It may also be easier than this earlier alternative answer as it does not require an additional Mac with an older version of macOS.

The following procedure can be completed from the target macOS Catalina The script will ask: Do you also want an. Reply to the prompt from the keyboard with: 1 return. The script will post its progress to the Terminal window, ending successfully with this:.

You will be prompted for location, language, etc – same as when you set up macOS on a new machine. The entire process took about minutes on on my Macbook Pro.

Sign up to join this community. The best answers are voted up and rise to the top. The key pair is usually installed in the. Display the User Settings page. Click Profile , User Settings. The Add Public Key dialog is displayed.

Choose Public Key File. This option enables you to browse to the public key file on your local hard disk. Paste Public Keys. This option enables you to paste the contents of the public key file into the window in the dialog box.

Click Add to upload the public key. A cloud profile is a text file that contains details of your key files and Oracle Cloud Identifier OCID resource identifiers for your cloud account, such as the following:.

Fingerprint of the public key. To obtain the fingerprint, you can use the openssl command:. Location of the private key on the client device. Specify the full path to the private key. Optional Passphrase for the private key. This is only required if the key is encrypted. Shown on the Oracle Cloud Infrastructure Console. Click Administration , Tenancy Details. Tenancy OCID. Compartment OCID.

Click Identity , Compartments. User OCID. Automatically, by using the Cloud Profile Manager. The Cloud Profile Manager is a component of Oracle VM VirtualBox that enables you to create, edit, and manage cloud profiles for your cloud service accounts. Automatically, by using the VBoxManage cloudprofile command.

Manually, by creating a config file in your Oracle Cloud Infrastructure configuration directory. This is the same file that is used by the Oracle Cloud Infrastructure command line interface. Oracle VM VirtualBox automatically uses the config file if no cloud profile file is present in your global configuration directory. Alternatively, you can import this file manually into the Cloud Profile Manager. This section describes how to use the Cloud Profile Manager to create a cloud profile.

To create a cloud profile by importing settings from your Oracle Cloud Infrastructure configuration file. Perform the following steps to create a new cloud profile automatically, using the Cloud Profile Manager:. Click the Add icon and specify a Name for the profile. Click Properties and specify the following property values for the profile:. Some of these are settings for your Oracle Cloud Infrastructure account, which you can view from the Oracle Cloud Infrastructure Console.

Click Apply to save your changes. Perform the following steps to import an existing Oracle Cloud Infrastructure configuration file into the Cloud Profile Manager:. Ensure that a config file is present in your Oracle Cloud Infrastructure configuration directory.

Click the Import icon to open a dialog that prompts you to import cloud profiles from external files. This action overwrites any cloud profiles that are in your Oracle VM VirtualBox global settings directory. Click Properties to show the cloud profile settings. Create a new cloud instance from a custom image stored on Oracle Cloud Infrastructure. You can configure whether a cloud instance is created and started after the export process has completed.

From the Format drop-down list, select Oracle Cloud Infrastructure. In the Account drop-down list, select the cloud profile for your Oracle Cloud Infrastructure account. The list after the Account field shows the profile settings for your cloud account. In the Machine Creation field, select an option to configure settings for a cloud instance created when you export to Oracle Cloud Infrastructure. The options enable you to do one of the following:.

Configure settings for the cloud instance after you have finished exporting the VM. Configure settings for the cloud instance before you start to export the VM. Optional Edit storage settings used for the exported virtual machine in Oracle Cloud Infrastructure.

You can change the following settings:. Emulated mode is suitable for legacy OS images. Depending on the selection in the Machine Creation field, the Cloud Virtual Machine Settings screen may be displayed before or after export.

This screen enables you to configure settings for the cloud instance, such as Shape and Disk Size. Click Create. Depending on the Machine Creation setting, a cloud instance may be started after upload to Oracle Cloud Infrastructure is completed. Oracle Cloud Infrastructure provides the option to import a custom Linux image. Before an Oracle VM VirtualBox image can be exported to Oracle Cloud Infrastructure, the custom image needs to be prepared to ensure that instances launched from the custom image can boot correctly and that network connections will work.

The following list shows some tasks to consider when preparing an Oracle Linux VM for export:. Use DHCP for network addresses. Do not specify a MAC address. Disable persistent network device naming rules. This means that the Oracle Cloud Infrastructure instance will use the same network device names as the VM. Add net. Disable any udev rules for network device naming.

For example, if an automated udev rule exists for net-persistence :. Enable the serial console. This enables you to troubleshoot the instance when it is running on Oracle Cloud Infrastructure. Remove the resume setting from the kernel parameters. This setting slows down boot time significantly. This configures use of the serial console instead of a graphical terminal. This configures the serial connection. This adds the serial console to the Linux kernel boot parameters.

To verify the changes, reboot the machine and run the dmesg command to look for the updated kernel parameters.

Enable paravirtualized device support. You do this by adding the virtio drivers to the initrd for the VM. This procedure works only on machines with a Linux kernel of version 3. Check that the VM is running a supported kernel:.

Use the dracut tool to rebuild initrd. Add the qemu module, as follows:. Verify that the virtio drivers are now present in initrd. For more information about importing a custom Linux image into Oracle Cloud Infrastructure, see also:. In the Source drop-down list, select Oracle Cloud Infrastructure. Choose the required cloud instance from the list in the Machines field.

Click Import to import the instance from Oracle Cloud Infrastructure. The following describes the sequence of events when you import an instance from Oracle Cloud Infrastructure. The custom image is exported to an Oracle Cloud Infrastructure object and is stored using Object Storage in the bucket specified by the user. The Oracle Cloud Infrastructure object is downloaded to the local host. Using a custom image means that you can quickly create cloud instances without having to upload your image to the cloud service every time.

Perform the following steps to create a new cloud instance on Oracle Cloud Infrastructure:. From the Destination drop-down list, select Oracle Cloud Infrastructure. In the Images list, select from the custom images available on Oracle Cloud Infrastructure. For example, you can edit the Disk Size and Shape used for the VM instance and the networking configuration. Click Create to create the new cloud instance. Monitor the instance creation process by using the Oracle Cloud Infrastructure Console.

You can also use the VBoxManage cloud instance command to create and manage instances on a cloud service. This section includes some examples of how VBoxManage commands can be used to integrate with Oracle Cloud Infrastructure and perform common cloud operations. For more details about the available commands for cloud operations, see Section 8. The Global Settings dialog can be displayed using the File menu, by clicking the Preferences item.

This dialog offers a selection of settings, most of which apply to all virtual machines of the current user.

The Extensions option applies to the entire system. Enables the user to specify the Host key. The Host key is also used to trigger certain VM actions, see Section 1. Enables the user to specify various settings for Automatic Updates. Enables the user to specify the GUI language. Enables the user to specify the screen resolution, and its width and height.

A default scale factor can be specified for all guest screens. Enables the user to configure the details of NAT networks. See Section 6. Enables the user to list and manage the installed extension packages. As briefly mentioned in Section 1. For example, you can start a virtual machine with the VirtualBox Manager window and then stop it from the command line.

This is the VirtualBox Manager, a graphical user interface that uses the Qt toolkit. This interface is described throughout this manual. While this is the simplest and easiest front-end to use, some of the more advanced Oracle VM VirtualBox features are not included. As opposed to the other graphical interfaces, the headless front-end requires no graphics support. This is useful, for example, if you want to host your virtual machines on a headless Linux server that has no X Window system installed.

If the above front-ends still do not satisfy your particular needs, it is possible to create yet another front-end to the complex virtualization engine that is the core of Oracle VM VirtualBox, as the Oracle VM VirtualBox core neatly exposes all of its features in a clean API. Oracle VM VirtualBox provides a soft keyboard that enables you to input keyboard characters on the guest.

A soft keyboard is an on-screen keyboard that can be used as an alternative to a physical keyboard. For best results, ensure that the keyboard layout configured on the guest OS matches the keyboard layout used by the soft keyboard.

Oracle VM VirtualBox does not do this automatically. When the physical keyboard on the host is not the same as the keyboard layout configured on the guest. For example, if the guest is configured to use an international keyboard, but the host keyboard is US English.

To send special key combinations to the guest. Note that some common key combinations are also available in the Input , Keyboard menu of the guest VM window. When using nested virtualization, the soft keyboard provides a method of sending key presses to a guest. By default, the soft keyboard includes some common international keyboard layouts. You can copy and modify these to meet your own requirements.

The name of the current keyboard layout is displayed in the task bar of the soft keyboard window. This is the previous keyboard layout that was used. Click the Layout List icon in the task bar of the soft keyboard window. The Layout List window is displayed. Select the required keyboard layout from the entries in the Layout List window. The keyboard display graphic is updated to show the available input keys. Modifier keys such as Shift, Ctrl, and Alt are available on the soft keyboard.

Click once to select the modifier key, click twice to lock the modifier key. The Reset the Keyboard and Release All Keys icon can be used to release all pressed modifier keys, both on the host and the guest.

To change the look of the soft keyboard, click the Settings icon in the task bar. You can change colors used in the keyboard graphic, and can hide or show sections of the keyboard, such as the NumPad or multimedia keys. You can use one of the supplied default keyboard layouts as the starting point to create a custom keyboard layout.

To permananently save a custom keyboard layout, you must save it to file. Otherwise, any changes you make are discarded when you close down the Soft Keyboard window. Custom keyboard layouts that you save are stored as an XML file on the host, in the keyboardLayouts folder in the global configuration data directory. Highlight the required layout and click the Copy the Selected Layout icon.

A new layout entry with a name suffix of -Copy is created. Edit keys in the new layout. Click on the key that you want to edit and enter new key captions in the Captions fields.

Optional Save the layout to file. This means that your custom keyboard layout will be available for future use. Any custom layouts that you create can later be removed from the Layout List, by highlighting and clicking the Delete the Selected Layout icon. For the various versions of Windows that are supported as host operating systems, please refer to Section 1.

In addition, Windows Installer must be present on your system. This should be the case for all supported Windows platforms. This will extract the installer into a temporary directory, along with the. MSI file. Run the following command to perform the installation:. Using either way displays the installation Welcome dialog and enables you to choose where to install Oracle VM VirtualBox, and which components to install.

USB support. This enables your VM’s virtual network cards to be accessed from other machines on your physical network. Python support. For this to work, an already working Windows Python installation on the system is required. Python version at least 2. Python 3 is also supported. Depending on your Windows configuration, you may see warnings about unsigned drivers, or similar.

The installer will create an Oracle VM VirtualBox group in the Windows Start menu, which enables you to launch the application and access its documentation. If this is not wanted, you must invoke the installer by first extracting as follows:. Then, run either of the following commands on the extracted.

The following features are available:. This feature must not be absent, since it contains the minimum set of files to have working Oracle VM VirtualBox installation. All networking support. For example, to only install USB support along with the main binaries, run either of the following commands:.

For some legacy Windows versions, the installer will automatically select the NDIS5 driver and this cannot be changed. Use either of the following commands:.

Set to 1 to enable, 0 to disable. Default is 1. Specifies whether or not the file extensions. Perform the following steps to install on a Mac OS X host:. Double-click on the dmg file, to mount the contents. A window opens, prompting you to double-click on the VirtualBox. To uninstall Oracle VM VirtualBox, open the disk image dmg file and double-click on the uninstall icon shown. To perform a non-interactive installation of Oracle VM VirtualBox you can use the command line version of the installer application.

Mount the dmg disk image file, as described in the installation procedure, or use the following command line:.

For the various versions of Linux that are supported as host operating systems, see Section 1. You may need to install the following packages on your Linux system before starting the installation.

SDL 1. This graphics library is typically called libsdl or similar. These packages are only required if you want to run the Oracle VM VirtualBox graphical user interfaces. In order to run other operating systems in virtual machines alongside your main operating system, Oracle VM VirtualBox needs to integrate very tightly with your system.

To do this it installs a driver module called vboxdrv into the system kernel. The kernel is the part of the operating system which controls your processor and physical hardware. Without this kernel module, you can still use the VirtualBox Manager to configure virtual machines, but they will not start. Network drivers called vboxnetflt and vboxnetadp are also installed. They enable virtual machines to make more use of your computer’s network capabilities and are needed for any virtual machine networking beyond the basic NAT mode.

Since distributing driver modules separately from the kernel is not something which Linux supports well, the Oracle VM VirtualBox install process creates the modules on the system where they will be used. This means that you may need to install some software packages from the distribution which are needed for the build process.

Required packages may include the following:. Also ensure that all system updates have been installed and that your system is running the most up-to-date kernel for the distribution.

The running kernel and the kernel header files must be updated to matching versions. The following list includes some details of the required files for some common distributions.

Start by finding the version name of your kernel, using the command uname -r in a terminal. The list assumes that you have not changed too much from the original installation, in particular that you have not installed a different kernel type. With Debian and Ubuntu-based distributions, you must install the correct version of the linux-headers , usually whichever of linux-headers-generic , linux-headers-amd64 , linux-headers-i or linux-headers-ipae best matches the kernel version name. Also, the linux-kbuild package if it exists.

Basic Ubuntu releases should have the correct packages installed by default. On Fedora, Red Hat, Oracle Linux and many other RPM-based systems, the kernel version sometimes has a code of letters or a word close to the end of the version name. For example “uek” for the Oracle Unbreakable Enterprise Kernel or “default” or “desktop” for the standard kernels. In this case, the package name is kernel-uek-devel or equivalent. If there is no such code, it is usually kernel-devel.

If you suspect that something has gone wrong with module installation, check that your system is set up as described above and try running the following command, as root:. See your system documentation for details of the kernel module signing process.

Oracle VM VirtualBox is available in a number of package formats native to various common Linux distributions. In addition, there is an alternative generic installer. Download the appropriate package for your distribution. The following example assumes that you are installing to a bit Ubuntu Xenial system. Use dpkg to install the Debian package,as follows:.

The installer will also try to build kernel modules suitable for the current running kernel. If the build process is not successful you will be shown a warning and the package will be left unconfigured. You may have to install the appropriate Linux kernel headers, see Section 2. After correcting any problems, run the following command:. If a suitable kernel module was found in the package or the module was successfully built, the installation script will attempt to load that module.

If this fails, please see Section Once Oracle VM VirtualBox has been successfully installed and configured, you can start it by clicking VirtualBox in your Start menu or from the command line. Creates a new system group called vboxusers.

The installer must be executed as root with either install or uninstall as the first parameter. Or if you do not have the sudo command available, run the following as root instead:. Either use the OS user management tools or run the following command as root:.

The usermod command of some older Linux distributions does not support the -a option, which adds the user to the given group without affecting membership of other groups. In this case, find out the current group memberships with the groups command and add all these groups in a comma-separated list to the command line after the -G option.

For example: usermod -G group1 , group2 ,vboxusers username. If you cannot use the shell script installer described in Section 2. Run the installer as follows:. This will unpack all the files needed for installation in the directory install under the current directory. To build the module, change to the directory and use the following command:.

If everything builds correctly, run the following command to install the module to the appropriate module directory:. In case you do not have sudo, switch the user account to root and run the following command:. The above make command will tell you how to create the device node, depending on your Linux system. On certain Linux distributions, you might experience difficulties building the module. You will have to analyze the error messages from the build system to diagnose the cause of the problems.

In general, make sure that the correct Linux kernel sources are used for the build process. Next, you install the system initialization script for the kernel module and activate the initialization script using the right method for your distribution, as follows:. The Debian packages will request some user feedback when installed for the first time. The debconf system is used to perform this task. To prevent any user interaction during installation, default values can be defined.

A file vboxconf can contain the following debconf settings:. The first line enables compilation of the vboxdrv kernel module if no module was found for the current kernel. The second line enables the package to delete any old vboxdrv kernel modules compiled by previous installations. These default settings can be applied prior to the installation of the Oracle VM VirtualBox Debian package, as follows:. In addition there are some common configuration options that can be set prior to the installation.

The RPM format does not provide a configuration system comparable to the debconf system. To configure the installation process for. The automatic generation of the udev rule can be prevented with the following setting:. If the following line is specified, the package installer will not try to build the vboxdrv kernel module if no module fitting the current kernel was found. The Linux installers create the system user group vboxusers during installation. A user can be made a member of the group vboxusers either by using the desktop user and group tools, or with the following command:.

These are symbolic links to VBox. The following detailed instructions should only be of interest if you wish to execute Oracle VM VirtualBox without installing it first. You should start by compiling the vboxdrv kernel module and inserting it into the Linux kernel. The daemon is automatically started if necessary. There can be multiple daemon instances under different user accounts and applications can only communicate with the daemon running under the user account as the application.

The local domain socket resides in a subdirectory of your system’s directory for temporary files called. In case of communication problems or server startup problems, you may try to remove this directory. For the specific versions of Oracle Solaris that are supported as host operating systems, see Section 1. If you have a previously installed instance of Oracle VM VirtualBox on your Oracle Solaris host, please uninstall it first before installing a new instance.

The installation must be performed as root and from the global zone. This is because the Oracle VM VirtualBox installer loads kernel drivers, which cannot be done from non-global zones. To verify which zone you are currently in, execute the zonename command. The installer will then prompt you to enter the package you wish to install. Choose 1 or all and proceed. Next the installer will ask you if you want to allow the postinstall script to be executed.

Choose y and proceed, as it is essential to execute this script which installs the Oracle VM VirtualBox kernel module. Following this confirmation the installer will install Oracle VM VirtualBox and execute the postinstall setup script. Once the postinstall script has been executed your installation is now complete. You may now safely delete the uncompressed package and autoresponse files from your system. A user can be made a member of this group either by using the desktop user and group tools or by running the following command as root:.

Note that adding an active user to the vboxuser group will require the user to log out and then log in again. This should be done manually after successful installation of the package. Using the links provided is easier as you do not have to enter the full path. To perform the uninstallation, start a root terminal session and run the following command:. To perform a non-interactive installation of Oracle VM VirtualBox there is a response file named autoresponse.

The installer uses this for responses to inputs, rather than prompting the user. Extract the tar. Then open a root terminal session and run the following command:. To perform a non-interactive uninstallation, open a root terminal session and run the following command:. This is done by performing the following steps.

Start a root terminal and run the following command:. Use zonecfg to add the device resource and match properties to the zone, as follows:. This is specified below using the dir attribute and the special attribute. Reboot the zone using zoneadm and you should be able to run Oracle VM VirtualBox from within the configured zone. You have considerable latitude when deciding what virtual hardware to provide to the guest. Use virtual hardware to communicate with the host system or with other guests.

For example, you can use virtual hardware in the following ways:. Provide a guest system access to the physical network through its virtual network card. Provide the host system, other guests, and computers on the Internet access to the guest system.

Because Oracle VM VirtualBox is designed to provide a generic virtualization environment for x86 systems, it can run guest operating systems OSes of any kind. Platforms With Full Support. See Table 3. Platforms With Limited Support. Therefore, resolution of customer issues is not guaranteed.

Note that this feature is experimental and thus unsupported. Oracle VM VirtualBox is the first product to provide the modern PC architecture expected by OS X without requiring any of the modifications used by competing virtualization solutions.

For example, some competing solutions perform modifications to the Mac OS X install DVDs, such as a different boot loader and replaced files. Be aware of the following important issues before you attempt to install a Mac OS X guest:. Mac OS X is commercial, licensed software and contains both license and technical restrictions that limit its use to certain hardware and usage scenarios. You must understand and comply with these restrictions.

These license restrictions are also enforced on a technical level. Mac OS X verifies that it is running on Apple hardware. Most DVDs that accompany Apple hardware check for the exact model.

Only CPUs that are known and tested by Apple are supported. The Mac OS X installer expects the hard disk to be partitioned. So, the installer will not offer a partition selection to you. Before you can install the software successfully, start the Disk Utility from the Tools menu and partition the hard disk. Close the Disk Utility and proceed with the installation. See Chapter 14, Known Limitations. This is especially true for bit Windows VMs.

You only need to provide the installation medium and a few other parameters, such as the name of the default user. Create a new VM. Use one of the following methods:. The VirtualBox Manager, see Section 1. The VBoxManage createvm command, see Section 8. The following sections in this chapter describe how to change the settings for a VM. Prepare the VM for unattended guest installation. Use the VBoxManage unattended command, see Section 8. Start the VM. When you start the VM, the unattended installation is performed automatically.

The installation operation changes the boot device order to boot the virtual hard disk first and then the virtual DVD drive. If the virtual hard disk is empty prior to the automatic installation, the VM boots from the virtual DVD drive and begins the installation. If the virtual hard disk contains a bootable OS, the installation operation exits. Section 3. The following example shows how to perform an unattended guest installation for an Oracle Linux VM.

Create a SATA storage controller and attach the virtual hard disk. Specifies a login name, full name, and login password for a default user on the guest OS. Note that the specified password is also used for the root user account on the guest. Oracle VM VirtualBox virtualizes nearly all hardware of the host. Depending on a VM’s configuration, the guest will see the following virtual hardware:. Input devices. These devices are supported by most guest OSes. Oracle VM VirtualBox emulates the most common types of hard disk controllers.

Whereas supporting only one of these controllers would be enough for Oracle VM VirtualBox by itself, this multitude of storage adapters is required for compatibility with other hypervisors. Windows is very selective about its boot devices, and migrating VMs between hypervisors is very difficult or impossible if the storage controllers are different.

Note that for some legacy Windows guests, third party drivers must be installed for xHCI support. The emulated USB controllers do not communicate directly with devices on the host. In the Settings window, under General , you can configure the most fundamental aspects of the virtual machine such as memory and essential hardware.

The following tabs are available. In the Basic tab of the General settings category, you can find these settings:. As a result, you can only use characters which are allowed for file names on your host OS. You can display these using the VBoxManage commands. This is the same setting that is specified in the New Virtual Machine wizard.

Whereas the default settings of a newly created VM depend on the selected OS type, changing the type later has no effect on VM settings. This value is purely informational and decorative. The following settings are available in the Advanced tab:. See Section With this setting, you can specify any other folder for each VM.

Shared Clipboard: You can select here whether the clipboard of the guest OS should be shared with that of your host. If you select Bidirectional , then Oracle VM VirtualBox will always make sure that both clipboards contain the same data. In such a case, this setting has no effect. For security reasons, the shared clipboard is disabled by default. This setting can be changed at any time using the Shared Clipboard menu item in the Devices menu of the virtual machine.

Drag and Drop: This setting enables support for drag and drop. Select an object, such as a file, from the host or guest and directly copy or open it on the guest or host.

Multiple drag and drop modes for a VM enable restricting of access in either direction. For drag and drop to work the Guest Additions need to be installed on the guest. Drag and drop is disabled by default. This setting can be changed at any time using the Drag and Drop menu item in the Devices menu of the virtual machine. On the Description tab you can enter a description for your virtual machine.

This has no effect on the functionality of the machine, but you may find this space useful to note down things such as the configuration of a virtual machine and the software that has been installed into it. The Disk Encryption tab enables you to encrypt disks that are attached to the virtual machine.

To enable disk encryption, select the Enable Disk Encryption check box. Settings are available to configure the cipher used for encryption and the encryption password. All files related to the virtual machine except disk images are stored unencrypted. The System category groups various settings that are related to the basic hardware that is presented to the virtual machine.

As the activation mechanism of Microsoft Windows is sensitive to hardware changes, if you are changing hardware settings for a Windows guest, some of these changes may trigger a request for another activation with Microsoft. On the Motherboard tab, you can configure virtual hardware that would normally be on the motherboard of a real computer. The specified amount of memory will be requested from the host OS, so it must be available or made available as free memory on the host when attempting to start the VM and will not be available to the host while the VM is running.

This is the same setting that was specified in the New Virtual Machine wizard, as described in Section 1. Generally, it is possible to change the memory size after installing the guest OS. But you must not reduce the memory to an amount where the OS would no longer boot.

Boot Order: Determines the order in which the guest OS will attempt to boot from the various virtual boot devices. This needs to be configured in detail on the command line. Chipset: You can select which chipset will be presented to the virtual machine. PIIX3 is the default chipset for most guests. Using the ICH9 chipset it is also possible to configure up to 36 network cards, compared to a maximum of eight network adapters with PIIX3.

Using the virtual USB tablet has the advantage that movements are reported in absolute coordinates, instead of as relative position changes. This enables Oracle VM VirtualBox to translate mouse events over the VM window into tablet events without having to “capture” the mouse in the guest as described in Section 1.

This makes using the VM less tedious even if Guest Additions are not installed. It is also required if you want to use more than one virtual CPU in a virtual machine. Turning it on after installation will have no effect however. ACPI is the current industry standard to allow OSes to recognize hardware, configure motherboards and other devices and manage power. ACPI can only be turned off using the command line. However, turning it on after installation will have no effect. On the Processor tab, you can configure settings for the CPU used by the virtual machine.

You should not configure virtual machines to use more CPU cores than are available physically. This includes real cores, with no hyperthreads. Note that limiting the execution time of the virtual CPUs may cause guest timing problems. A warning is displayed at the bottom of the Processor tab if an Execution Cap setting is made that may affect system performance. This is made possible by adding another 4 bits to memory addresses, so that with 36 bits, up to 64 GB can be addressed.

For details, see Section 9. Paravirtualization Interface: Oracle VM VirtualBox provides paravirtualization interfaces to improve time-keeping accuracy and performance of guest OSes. The options available are documented under the –paravirtprovider option in Section 8. For further details on the paravirtualization providers, see Section Hardware Virtualization: You can configure hardware virtualization features for each virtual machine.

For technical details, see Section Advanced users may be interested in technical details about hardware virtualization. In most cases, the default settings on the Acceleration tab will work well. Oracle VM VirtualBox selects sensible defaults, depending on the OS that you selected when you created the virtual machine.

In certain situations, however, you may want to change the preconfigured defaults. Video Memory: Sets the size of the memory provided by the virtual graphics card available to the guest, in MB.

As with the main memory, the specified amount will be allocated from the host’s resident memory. Based on the amount of video memory, higher resolutions and color depths may be available. The GUI will show a warning if the amount of video memory is too small to be able to switch the VM into full screen mode.

The minimum value depends on the number of virtual monitors, the screen resolution and the color depth of the host display as well as on the use of 3D acceleration and 2D video acceleration. Extra memory may be required if display acceleration is used.

Up to eight such virtual monitors are supported. The output of the multiple monitors are displayed on the host in multiple VM windows which are running side by side. However, in full screen and seamless mode, they use the available physical monitors attached to the host.

As a result, for full screen and seamless modes to work with multiple monitors, you will need at least as many physical monitors as you have virtual monitors configured, or Oracle VM VirtualBox will report an error. Scale Factor: Enables scaling of the display size. For multiple monitor displays, you can set the scale factor for individual monitors, or globally for all of the monitors.

You can set a default scale factor for all VMs. Use the Display tab in the Global Settings dialogs. Graphics Controller: Specifies the graphics adapter type used by the guest VM.

The following options are available:. This is the default graphics controller for Windows versions before Windows 7 and for Oracle Solaris. This is the default graphics controller for Linux guests. None: Does not emulate a graphics adapter type. Enable 3D Acceleration: If a virtual machine has Guest Additions installed, you can select here whether the guest should support accelerated 3D graphics. Enable 2D Video Acceleration: If a virtual machine with Microsoft Windows has Guest Additions installed, you can select here whether the guest should support accelerated 2D video graphics.

This enables you to connect to the console of the virtual machine remotely with any standard RDP viewer, such as mstsc. On Linux and Oracle Solaris systems you can use the standard open source rdesktop program.

These features are described in Section 7. Enable Server: Select this check box and configure settings for the remote display connection. On the Recording tab you can enable video and audio recording for a virtual machine and change related settings. Note that these features can be enabled and disabled while a VM is running. Enable Recording: Select this check box and select a Recording Mode option. Recording Mode: You can choose to record video, audio, or both video and audio. Some settings on the Recording tab may be grayed out, depending on the Recording Mode setting.

File Path: The file where the recording is saved. Frame Size: The video resolution of the recorded video, in pixels. The drop-down list enables you to select from common frame sizes. Frames that have a higher frequency are skipped. Increasing this value reduces the number of skipped frames and increases the file size. Video Quality: Use the slider to set the the bit rate of the video in kilobits per second.

Increasing this value improves the appearance of the video at the cost of an increased file size. Audio Quality: Use the slider to set the quality of the audio recording. Increasing this value improves the audio quality at the cost of an increased file size. Screens: For a multiple monitor display, you can select which screens to record video from.

As you adjust the video and audio recording settings, the approximate output file size for a five minute video is shown. In a real computer, so-called storage controllers connect physical disk drives to the rest of the computer. If you have used the Create VM wizard to create a machine, you will normally see something like the following:.

Depending on the guest OS type that you selected when you created the VM, a new VM includes the following storage devices:. IDE controller. SATA controller. This is a modern type of storage controller for higher hard disk data throughput, to which the virtual hard disks are attached.

Initially you will normally have one such virtual disk, but as shown in the previous screenshot, you can have more than one. Each is represented by a disk image file, such as a VDI file in this example. This might also apply if you selected an older OS type when you created the VM. Oracle VM VirtualBox also provides a floppy controller. You cannot add devices other than floppy drives to this controller. You can modify these media attachments freely. For example, if you wish to copy some files from another virtual disk that you created, you can connect that disk as a second hard disk, as in the above screenshot.

You can then either select Optical Drive or Hard Disk. If you clicked on a floppy controller, you can add a floppy drive instead. Alternatively, right-click on the storage controller and select a menu item there. A dialog is displayed, enabling you to select an existing disk image file or to create a new disk image file.

Most commonly, you will select this option when installing an OS from an ISO file that you have obtained from the Internet. For example, most Linux distributions are available in this way. Depending on the type of disk image, you can set the following Attributes for the disk image in the right part of the Storage settings page:.

The device slot of the controller that the virtual disk is connected to. IDE controllers have four slots: primary device 0, primary device 1, secondary device 0, and secondary device 1. Solid-state Drive presents a virtual disk to the guest as a solid-state device.

Hot-pluggable presents a virtual disk to the guest as a hot-pluggable device. This means that the virtual optical disk is not removed from when the guest system ejects it. To remove an attachment , either select it and click on the Remove icon at the bottom, or right-click on it and select the menu item.

Since the Settings dialog is not available at that time, you can also access these settings from the Devices menu of your virtual machine window. The Audio section in a virtual machine’s Settings window determines whether the VM will detect a connected sound card, and if the audio output should be played on the host system.

To enable audio for a guest, select the Enable Audio check box. The following settings are available:. On newer Linux distributions, the PulseAudio subsystem is preferred. The Network section in a virtual machine’s Settings window enables you to configure how Oracle VM VirtualBox presents virtual network cards to your VM, and how they operate.

This way the guest can connect to the outside world using the host’s networking and the outside world can connect to services on the guest which you choose to make visible outside of the virtual machine. It supports many virtual network cards per virtual machine. The first four virtual network cards can be configured in detail in the VirtualBox Manager window.

Additional network cards can be configured using the VBoxManage command. Many networking options are available.

See Chapter 6, Virtual Networking for more information. Serial ports were commonly used with modems, and some computer mice used to be connected to serial ports before USB became commonplace. While serial ports are no longer as common as they used to be, there are still some important uses left for them.

For example, serial ports can be used to set up a primitive network over a null-modem cable, in case Ethernet is not available. Also, serial ports are indispensable for system programmers needing to do kernel debugging, since kernel debugging software usually interacts with developers over a serial port. With virtual serial ports, system programmers can do kernel debugging on a virtual machine instead of needing a real computer to connect to. Both receiving and transmitting data is supported.

How this virtual serial port is then connected to the host is configurable, and the details depend on your host OS. You can use either the Settings tabs or the VBoxManage command to set up virtual serial ports. For the latter, see Section 8. You can configure up to four virtual serial ports per virtual machine.

For each device, you must set the following:. Port Number: This determines the serial port that the virtual machine should see. For best results, use the traditional values as follows:. You can also configure a user-defined serial port.

 
 

Vmware fusion 8.5 high sierra free

 

The manual provides information on how to install Oracle Vmware fusion 8.5 high sierra free VirtualBox and use it to create and configure virtual machines. It is assumed that readers are familiar with Web technologies and have a general understanding of Windows and UNIX platforms.

Oracle customers that have purchased support have access to electronic support through My Oracle Support. Oracle is fully committed to diversity and inclusion. Oracle recognizes the influence of ethnic and cultural values and is working to remove language from our products and documentation that might be considered insensitive.

While doing so, we are also mindful of the necessity to maintain compatibility with our customers’ existing technologies and the need to ensure continuity of service as Oracle’s offerings and industry standards evolve.

Because of these technical constraints, our effort to remove insensitive terms is an ongoing, long-term process. Oracle VM VirtualBox is a cross-platform virtualization application. What does that mean? Secondly, it extends the capabilities of your existing vmware fusion 8.5 high sierra free so that it can run multiple OSes, inside multiple virtual machines, at the same time. As an example, you can run Windows and Linux on your Mac, run Windows Server on your Linux server, run Linux on your Windows PC, and so vmware fusion 8.5 high sierra free, all alongside your existing applications.

You can install and run as many virtual machines as you like. The only practical limits are disk space and memory. Oracle VM VirtualBox is deceptively simple yet also very powerful. It can run everywhere from small embedded systems or desktop class machines all the way up to datacenter deployments and even Cloud environments.

Figure 1. In this User Manual, we will begin simply with a quick introduction to virtualization and how to get your first virtual machine running with the easy-to-use Oracle VM VirtualBox graphical user interface. Subsequent chapters will go into much more detail covering more powerful tools and features, but fortunately, it is not necessary to read the entire User Manual before you can use Oracle VM VirtualBox.

The techniques and features that Oracle VM Нажмите для деталей provides are useful in vmware fusion 8.5 high sierra free following scenarios:.

Running multiple operating systems simultaneously. This way, you can run software written for one OS on vmware fusion 8.5 high sierra free, such as Windows software on Linux or a Mac, without having vmware fusion 8.5 high sierra free reboot to use vmware fusion 8.5 high sierra free. Easier software installations. Software vendors can use virtual machines to ship entire software configurations.

For example, installing a complete mail server solution vmware fusion 8.5 high sierra free a real machine can be a tedious task. With Oracle VM VirtualBox, such a complex vmware fusion 8.5 high sierra free, often called an appliancecan be packed into a virtual machine. Installing and running a mail server becomes as easy as importing such an appliance into Oracle VM VirtualBox.

Testing and disaster recovery. Once installed, a virtual machine and its virtual hard disks microsoft 2010 professional softonic download free download be considered a container that can be arbitrarily frozen, woken up, copied, backed up, and transported between hosts. On top of that, with the use of another Oracle VM VirtualBox feature called snapshotsone can save a particular state of a virtual machine and revert back to that state, if necessary.

This way, one can freely experiment with a computing environment. If something goes wrong, such as problems after installing software or infecting the guest with a virus, you can easily switch back to a previous snapshot and avoid the need of frequent backups and restores. Any number of snapshots can be created, allowing you to travel back нажмите чтобы увидеть больше forward in virtual machine time.

You can delete snapshots while a VM is running to reclaim disk space. Infrastructure consolidation. Virtualization can significantly reduce hardware and electricity costs. Most of the time, computers today only use a fraction of their potential power and run with low average system loads. A lot of hardware resources as well as electricity is thereby wasted. So, instead of running many such physical computers that are only partially нажмите чтобы прочитать больше, one can pack many virtual machines onto a few powerful hosts and balance the loads between them.

When dealing with virtualization, and also for understanding the following chapters of this documentation, it helps to http://replace.me/12901.txt oneself with a bit of crucial terminology, especially the following terms:. Host operating system host OS. See Section 1. There may be platform-specific differences which we will point out where appropriate. Guest operating system guest OS. This is the OS that is running inside the virtual machine.

But to achieve near-native performance of the guest code on любви sony vegas pro 11 tutorial francais pdf free download Вами machine, we had to go through a lot of optimizations that are specific to certain OSes. So while your favorite OS may run as a guest, we officially support and optimize for a select few, which include the most common OSes.

See Section 3. Virtual machine VM. In other words, you run your guest OS in a VM. Normally, a VM is shown as a vmware fusion 8.5 high sierra free on your computer’s desktop. Depending on which of the various frontends of Oracle VM VirtualBox you use, the VM might be shown in full screen mode or remotely on another computer.

Some parameters describe hardware settings, such as the amount of memory and number of CPUs assigned. Other parameters describe the state information, such as whether the VM is running or saved.

See Chapter 8, VBoxManage. Guest Additions. This refers to special software packages which are shipped with Oracle VM VirtualBox but designed to be installed ссылка на продолжение a VM to improve performance of the guest OS and to add extra features. See Chapter 4, Guest Additions. Oracle VM VirtualBox runs on a large number of bit host operating systems. Oracle VM VirtualBox is a so-called hosted hypervisor, sometimes referred to as a type 2 hypervisor.

Whereas a bare-metal or type 1 hypervisor would run directly on the hardware, Oracle VM VirtualBox requires an existing OS to be installed. It can thus run alongside existing applications on that host. To a very large degree, Oracle Vmware fusion 8.5 high sierra free VirtualBox is functionally identical on all of the host platforms, and the same file and image formats are used.

This enables you to run virtual machines created on one host on another host with a different host OS. For example, you can create a virtual machine on Windows vmware fusion 8.5 high sierra free then vmware fusion 8.5 high sierra free it under Linux.

In addition, virtual machines can easily be imported and exported using перейти Open Virtualization Format OVFan industry standard created for this purpose. You can even import Смотрите подробнее that were created with a different virtualization software. For users of Oracle Cloud Infrastructure the functionality extends to exporting and importing virtual machines to and from the cloud.

This simplifies development of applications and deployment to the production environment. Guest Additions: shared folders, seamless windows, 3D virtualization.

The Oracle VM VirtualBox Guest Additions are software packages which can be installed inside of supported guest systems to improve their performance and to provide additional integration and communication with the host system. After installing the Guest Additions, a virtual machine will support automatic adjustment of video resolutions, seamless windows, accelerated 3D graphics and more. In particular, Guest Additions provide for shared folderswhich let you access files on the host system from within a guest machine.

See Section 4. Great hardware support. Guest multiprocessing SMP. USB device support. Oracle VM VirtualBox implements a virtual USB controller and enables you to connect arbitrary USB devices to your virtual machines without having to install device-specific drivers on the host. USB support is not limited to certain device categories. Hardware compatibility. Oracle VM VirtualBox virtualizes a vast array of virtual devices, among them many devices that are typically provided by other virtualization platforms.

This enables easy cloning of disk images from real machines and importing of third-party virtual machines into Oracle VM VirtualBox. Full ACPI support. This enables easy cloning of disk images from real machines or third-party virtual machines into Oracle VM VirtualBox.

For mobile systems running on battery, the guest can thus enable energy saving and notify the user of the remaining power, for example in full screen modes. Multiscreen resolutions. Oracle VM VirtualBox virtual machines support screen resolutions many times that of a physical screen, allowing them to be spread over a large number of screens attached to the host system. Built-in iSCSI support. This unique feature enables you to connect a virtual machine directly to an iSCSI storage server without going through the host system.

The VM accesses the iSCSI target directly without the extra overhead that is required for virtualizing hard disks in container files. See Section 5. PXE Network boot. Multigeneration branched snapshots. Oracle VM VirtualBox can save arbitrary snapshots of the state of the virtual machine. You can go back in time and revert the virtual machine to any such snapshot and start an alternative VM configuration from there, effectively creating a whole snapshot tree.

You can create and delete snapshots while the virtual machine is running. VM groups. Oracle VM VirtualBox provides a groups feature that enables the user to organize and control virtual machines collectively, as well as individually. In addition to basic groups, it is also possible for any VM to be in more than one group, and for groups to be nested in a hierarchy.

This means you can have groups of groups.

 

FAQ: Google Fusion Tables – Fusion Tables Help.macOS beta stops installing … | Apple Developer Forums

 

How-To Systems Support Videos. For Mac specspricesanswersside-by-side Mac comparisona tool to lookup Macs by serial numberand more, see EveryMac. For iPod, iPhone and iPad info, hit Everyi. Sisrra to share Hackintosh. Helpful individuals have provided step-by-step “how to” guides and tutorials as well as general advice on installing OS X on everything from self-built desktop systems and notebooks to netbooks, tablets, and more. Be sure to see the Hackintosh video tutorialstoo.

The current version of the Mac operating system is macOS 12 “Monterey”. Guides to install this version hibh the macOS on PCs include:. The site covers the macOS Be sure to confirm hardware compatibility before upgrading an older Hackintosh to hjgh version of the macOS vmware fusion 8.5 high sierra free buying hardware for a new one.

Helpful guides to install this http://replace.me/8338.txt of the macOS on PCs include:. If you have not used this installation method before, you also may find this general Getting Started with OpenCore guide helpful. Install macOS Big Sur on Gigabyte Gaming X Z – A thorough installation guide for this motherboard and compatible parts that may be of particular fusioh to gamers and those who do media editing.

Be sure to verify hardware compatibility before читать больше an older Hackintosh to this version of the macOS sierta buying vmware fusion 8.5 high sierra free for a new hugh. Note that macOS Useful guides sierfa install this version of macOS on a PC include:.

The site also has instructions to cleanup kexts after installationhow to upgrade directly to macOS Catalina from macOS Mojave on an older Hackintosh, and covers the macOS Update PC from macOS Mojave to Catalina serra An archive from Floppyblog no longer onlinethis post covers the upgrade procedure as well as troubleshooting for common problems. Note that official hardware support for macOS It also drops support for bit apps entirely.

Be certain to verify hardware and app compatibility before upgrading an older Hackintosh to this version of the operating system or buying parts for a new system.

In addition to more limited hardware support, later versions of the macOS do not run bit apps at all, so macOS A number of useful tutorials for Mojave include:. The site also has troubleshooting helphow to install third-party kextsand covers the macOS Create a macOS Mojave Be particularly certain to verify hardware and app compatibility before upgrading an older Hackintosh to this vmwarr of the operating system or buying parts for a new one. In addition to potential hardware compatibility issues, you also might have bit apps that do not run, or do not run well under newer versions of the macOS and macOS Quality Hackintosh tutorials for High Sierra include:.

The site has troubleshooting help and hardware recommendations for building your own system, as well. It covers the macOS Includes hardware recommendations, vmware fusion 8.5 high sierra free. Install macOS High Sierra with Clover – If the “official” tutorial vmware fusion 8.5 high sierra free enough, this quality tutorial from well-established Mac site Mac Observer may be exactly what you need. The same author also covers the hardware components that he selected адрес his Hackintosh, which he has named ” Vmware fusion 8.5 high sierra free.

For maximum performance, be sure to confirm hardware compatibility with HVEC before buying parts. Although official macOS Quality Hackintosh tutorials for Sierra include:. The site has troubleshooting guidelines if the installation does not work properly, as well.

See the corresponding video below, also. Ironically, it is not up-to-date, but it covers hardware selection and frew as well as installing macOS Sierra.

Building a Hackintosh Pro – An archive of a helpful tutorial to build a powerful fusoon desktop Hackintosh from Xierra Counsell. It includes hardware selection and basic software installation alike.

Be particularly certain to verify compatibility before upgrading an older Hackintosh to this version of the vjware system, too.

Because hardware support for macOS Sierra Quality Hackintosh tutorials for El Здесь include:. The site has troubleshooting guidelines if the installation does not go smoothly, also. It covers the OS X Install OS Sifrra El Capitan on PCs with Unibeast – If the “official” tutorial from tonymacx86 isn’t as easy to follow as you would like, you might prefer this installation guide from MacBreakerwhich includes step-by-step screenshots of the process.

Note that although siera hardware support for OS X If Metal capability or another particular feature is of critical interest to you, make sure that it is likely to work with your desired Hackintosh configuration prior to making hardware purchases. Although official OS X Quality Hackintosh tutorials for Yosemite include:. For those interested in more detailed understanding of the process, the same site also provides an installation tutorial using Clover.

Install OS X Also see the ” All-in-One Guide ” from another helpful forum user. Forum postings from ” vmware fusion 8.5 high sierra free ” and ” snatch ” may be useful, as well. These tutorials frree the Chameleon bootloader.

The same site covers installing the Yosemite Zone distro within the Virtualbox virtualization suiteas well. Quality Hackintosh tutorials for Mavericks include:. Ssierra site also covers the OS X Installing OS X If the “official” guide above isn’t sufficient, you also may find this site’s OS X Mavericks Unibeast tutorial and its tutorial for the sketchy Niresh distro helpful, too. OS X This tutorial also vmware fusion 8.5 high sierra free a list of FAQs that can be quite helpful for troubleshooting.

Covers hardware selection and construction as well as installing Fuion X Mavericks. Create a Bootable OS X Although xierra compatibility is essentially identical to OS X The site covers the OS X The author also provides shorter tutorials about OS X Mountain Lion software installation and Hackintosh performance hardware options. Build an OS X It covers hardware selection and assembly in addition to OS X installation. Upgrade to OS X Significant coverage of emulation environments, too. Note that just like its vmware fusion 8.5 high sierra free, OS X Those who need older software freee instead consider Mac OS X Hackintosh tutorials for OS X The site offers a “Lion” walkthrough for UniBeasttoo.

Lion on на этой странице Hackintosh frre An insightful and detailed post from photographer Thomas Pindelski. Covers OS X Also from Bassheadtech. Note that Mac OS X Hackintosh fgee for Mac OS X The same site also provides a guide to install the operating system on an older “Sandy Bridge” system.

Uses the iBoot Fmware and Multibeast applications. Turning PC into Apple Macintosh – An archive of an insightful evaluation of a personal experience детальнее на этой странице a Hackintosh and a comparison of the resulting Hackintosh to a Mac Pro from BenchmarkReviews no iserra online.

The same site also offers a list of kexts that may be helpful. There are a variety of Mac OS X See fusioon below videos too. Let’s fsion it, given the vast assortment of configurations, you can’t install Windows on any old PC and expect it to work like OS X does on a Mac. Vmware fusion 8.5 high sierra free, many have experimented with Mac OS X on a vmware fusion 8.5 high sierra free variety of PC hardware and have shared their findings with the world.

The following listings of Hackintosh compatible computers, parts, motherboards and drivers kexts should be helpful:. OSx86 Project – The original wiki that lists desktop and notebook computers, as well as sifrra, that are compatible with a variety of versions of Mac OS X. In turn, vmware fusion 8.5 high sierra free is xierra to make it possible взято отсюда the operating system to “utilize читать полностью of your hardware” — from tonymacx86 registration required.

Ссылка на продолжение are a number of vibrant and active communities that focus on helping vmware fusion 8.5 high sierra free another to configure, build, and troubleshoot Hackintosh systems. Notable Hackintosh communities such as the following may be useful to you:.

Before posting a message in any of these forums, it always is good form to first search and see whether or not your question has нажмите чтобы увидеть больше addressed previously.

Those who do not do so can expect to be dismissed as “noobs” or ignored. Be sure to also see the written Hackintosh tutorialsabove. This helpful video from Mark with Tech no longer online offers easy-to-follow instructions to install macOS Catalina This quick video from Mark with Tech no longer online provides step-by-step instructions to install macOS Mojave

 
 

macOS – Wikipedia.Fusion & macOS High Sierra GM – VMware Technology Network VMTN

 
 

Guest operating system guest OS. This is the OS that is running inside the virtual machine. But to achieve near-native performance of the guest code on your machine, we had to go through a lot of optimizations that are specific to certain OSes. So while your favorite OS may run as a guest, we officially support and optimize for a select few, which include the most common OSes. See Section 3.

Virtual machine VM. In other words, you run your guest OS in a VM. Normally, a VM is shown as a window on your computer’s desktop. Depending on which of the various frontends of Oracle VM VirtualBox you use, the VM might be shown in full screen mode or remotely on another computer. Some parameters describe hardware settings, such as the amount of memory and number of CPUs assigned.

Other parameters describe the state information, such as whether the VM is running or saved. See Chapter 8, VBoxManage. Guest Additions. This refers to special software packages which are shipped with Oracle VM VirtualBox but designed to be installed inside a VM to improve performance of the guest OS and to add extra features.

See Chapter 4, Guest Additions. Oracle VM VirtualBox runs on a large number of bit host operating systems. Oracle VM VirtualBox is a so-called hosted hypervisor, sometimes referred to as a type 2 hypervisor. Whereas a bare-metal or type 1 hypervisor would run directly on the hardware, Oracle VM VirtualBox requires an existing OS to be installed.

It can thus run alongside existing applications on that host. To a very large degree, Oracle VM VirtualBox is functionally identical on all of the host platforms, and the same file and image formats are used.

This enables you to run virtual machines created on one host on another host with a different host OS. For example, you can create a virtual machine on Windows and then run it under Linux. In addition, virtual machines can easily be imported and exported using the Open Virtualization Format OVF , an industry standard created for this purpose.

You can even import OVFs that were created with a different virtualization software. For users of Oracle Cloud Infrastructure the functionality extends to exporting and importing virtual machines to and from the cloud.

This simplifies development of applications and deployment to the production environment. Guest Additions: shared folders, seamless windows, 3D virtualization. The Oracle VM VirtualBox Guest Additions are software packages which can be installed inside of supported guest systems to improve their performance and to provide additional integration and communication with the host system.

After installing the Guest Additions, a virtual machine will support automatic adjustment of video resolutions, seamless windows, accelerated 3D graphics and more. In particular, Guest Additions provide for shared folders , which let you access files on the host system from within a guest machine. See Section 4. Great hardware support. Guest multiprocessing SMP. USB device support. Oracle VM VirtualBox implements a virtual USB controller and enables you to connect arbitrary USB devices to your virtual machines without having to install device-specific drivers on the host.

USB support is not limited to certain device categories. Hardware compatibility. Oracle VM VirtualBox virtualizes a vast array of virtual devices, among them many devices that are typically provided by other virtualization platforms. This enables easy cloning of disk images from real machines and importing of third-party virtual machines into Oracle VM VirtualBox. Full ACPI support. This enables easy cloning of disk images from real machines or third-party virtual machines into Oracle VM VirtualBox.

For mobile systems running on battery, the guest can thus enable energy saving and notify the user of the remaining power, for example in full screen modes. Multiscreen resolutions. Oracle VM VirtualBox virtual machines support screen resolutions many times that of a physical screen, allowing them to be spread over a large number of screens attached to the host system. Built-in iSCSI support. This unique feature enables you to connect a virtual machine directly to an iSCSI storage server without going through the host system.

The VM accesses the iSCSI target directly without the extra overhead that is required for virtualizing hard disks in container files. See Section 5. PXE Network boot. Multigeneration branched snapshots. Oracle VM VirtualBox can save arbitrary snapshots of the state of the virtual machine. You can go back in time and revert the virtual machine to any such snapshot and start an alternative VM configuration from there, effectively creating a whole snapshot tree.

You can create and delete snapshots while the virtual machine is running. VM groups. Oracle VM VirtualBox provides a groups feature that enables the user to organize and control virtual machines collectively, as well as individually. In addition to basic groups, it is also possible for any VM to be in more than one group, and for groups to be nested in a hierarchy. This means you can have groups of groups. Clean architecture and unprecedented modularity. Oracle VM VirtualBox has an extremely modular design with well-defined internal programming interfaces and a clean separation of client and server code.

This makes it easy to control it from several interfaces at once. For example, you can start a VM simply by clicking on a button in the Oracle VM VirtualBox graphical user interface and then control that machine from the command line, or even remotely. Due to its modular architecture, Oracle VM VirtualBox can also expose its full functionality and configurability through a comprehensive software development kit SDK , which enables integration of Oracle VM VirtualBox with other software systems.

Remote machine display. Instead, the VRDE is plugged directly into the virtualization layer. As a result, it works with guest OSes other than Windows, even in text mode, and does not require application support in the virtual machine either. Extensible RDP authentication. In addition, it includes an easy-to-use SDK which enables you to create arbitrary interfaces for other methods of authentication. See Section 7. Intel hardware is required. See also Chapter 14, Known Limitations.

Linux hosts bit. Includes the following:. See Section 2. However, the formally tested and supported Linux distributions are those for which we offer a dedicated package. Oracle Solaris hosts bit only. The following versions are supported with the restrictions listed in Chapter 14, Known Limitations :. Note that any feature which is marked as experimental is not supported. Feedback and suggestions about such features are welcome. If you have installed software before, installation should be straightforward.

On each host platform, Oracle VM VirtualBox uses the installation method that is most common and easy to use. If you run into trouble or have special requirements, see Chapter 2, Installation Details for details about the various installation methods. Base package. Extension packs. Additional extension packs can be downloaded which extend the functionality of the Oracle VM VirtualBox base package.

The extension pack provides the following added functionality:. The virtual USB 2. The virtual USB 3. Host webcam passthrough. See Section 9. Disk image encryption with AES algorithm. Cloud integration features. Oracle VM VirtualBox extension packages have a. To install an extension, simply double-click on the package file and a Network Operations Manager window is shown to guide you through the required steps.

To view the extension packs that are currently installed, start the VirtualBox Manager, as shown in Section 1. From the File menu, select Preferences. In the window that displays, go to the Extensions category. This shows you the extensions which are currently installed, and enables you to remove a package or add a new package. Alternatively, you can use the VBoxManage command line. See Section 8. On a Windows host, in the Programs menu, click on the item in the VirtualBox group.

On some Windows platforms, you can also enter VirtualBox in the search box of the Start menu. You may want to drag this item onto your Dock. Alternatively, you can enter VirtualBox in a terminal window. This window is called the VirtualBox Manager. The left pane will later list all your virtual machines. Since you have not yet created any virtual machines, this list is empty. The Tools button provides access to user tools, such as the Virtual Media Manager.

The pane on the right displays the properties of the currently selected virtual machine. Since you do not have any machines yet, the pane displays a welcome message. Click New in the VirtualBox Manager window. A wizard is shown, to guide you through setting up a new virtual machine VM.

On the following pages, the wizard will ask you for the bare minimum of information that is needed to create a VM, in particular:. For example, Windows 10 with Visio.

The Machine Folder is the location where VMs are stored on your computer. The default folder location is shown. The supported OSes are grouped. If you want to install something very unusual that is not listed, select Other. This is particularly important for bit guests. It is therefore recommended to always set it to the correct value.

The amount of memory given here will be taken away from your host machine and presented to the guest OS, which will report this size as the virtual computer’s installed RAM. Choose this setting carefully. The memory you give to the VM will not be available to your host OS while the VM is running, so do not specify more than you can spare.

If you run two VMs at the same time, even more memory will be allocated for the second VM, which may not even be able to start if that memory is not available. On the other hand, you should specify as much as your guest OS and your applications will require to run properly. A guest OS may require at least 1 or 2 GB of memory to install and boot up.

For best performance, more memory than that may be required. If insufficient RAM remains, the system might excessively swap memory to the hard disk, which effectively brings the host system to a standstill.

As with the other settings, you can change this setting later, after you have created the VM. There are many and potentially complicated ways in which Oracle VM VirtualBox can provide hard disk space to a VM, see Chapter 5, Virtual Storage , but the most common way is to use a large image file on your physical hard disk, whose contents Oracle VM VirtualBox presents to your VM as if it were a complete hard disk.

This file then represents an entire hard disk, so you can even copy it to another host and use it with another Oracle VM VirtualBox installation. To create a new, empty virtual hard disk, click the Create button. You can pick an existing disk image file.

The drop-down list presented in the window lists all disk images which are currently remembered by Oracle VM VirtualBox. These disk images are currently attached to a virtual machine, or have been attached to a virtual machine. Alternatively, click on the small folder icon next to the drop-down list.

In the displayed file dialog, you can click Add to select any disk image file on your host disk. Click the Create button. This wizard helps you to create a new disk image file in the new virtual machine’s folder. A dynamically allocated file only grows in size when the guest actually stores data on its virtual hard disk. Therefore, this file is small initially. As the drive is filled with data, the file grows to the specified size.

A fixed-size file immediately occupies the file specified, even if only a fraction of that virtual hard disk space is actually in use. While occupying much more space, a fixed-size file incurs less overhead and is therefore slightly faster than a dynamically allocated file. For details about the differences, see Section 5. But the image file must be large enough to hold the contents of the guest OS and the applications you want to install.

For a Windows or Linux guest, you will probably need several gigabytes for any serious use. The limit of the image file size can be changed later, see Section 8. After having selected or created your image file, click Next to go to the next page. Click Create , to create your new virtual machine. The virtual machine is displayed in the list on the left side of the VirtualBox Manager window, with the name that you entered initially.

After becoming familiar with the use of wizards, consider using the Expert Mode available in some wizards. Where available, this is selectable using a button, and speeds up the process of using wizards.

Go to the VirtualBox VMs folder in your system user’s home directory. Find the subdirectory of the machine you want to start and double-click on the machine settings file. This file has a. Starting a virtual machine displays a new window, and the virtual machine which you selected will boot up. Everything which would normally be seen on the virtual system’s monitor is shown in the window. See the screenshot image in Chapter 1, First Steps.

In general, you can use the virtual machine as you would use a real computer. There are couple of points worth mentioning however. This wizard helps you to select an installation medium. Since the VM is created empty, it would otherwise behave just like a real computer with no OS installed. It will do nothing and display an error message that no bootable OS was found. In the wizard’s drop-down list of installation media, select Host Drive with the correct drive letter.

In the case of a Linux host, choose a device file. This will allow your VM to access the media in your host drive, and you can proceed to install from there. If you have downloaded installation media from the Internet in the form of an ISO image file such as with a Linux distribution, you would normally burn this file to an empty CD or DVD and proceed as described above.

In this case, the wizard’s drop-down list contains a list of installation media that were previously used with Oracle VM VirtualBox. If your medium is not in the list, especially if you are using Oracle VM VirtualBox for the first time, click the small folder icon next to the drop-down list to display a standard file dialog. Here you can pick an image file on your host disks. After completing the choices in the wizard, you will be able to install your OS.

If you are running a modern guest OS that can handle such devices, mouse support may work out of the box without the mouse being captured as described below. But unless you are running the VM in full screen mode, your VM needs to share keyboard and mouse with other applications and possibly other VMs on your host.

After installing a guest OS and before you install the Guest Additions, described later, either your VM or the rest of your computer can “own” the keyboard and the mouse. Both cannot own the keyboard and mouse at the same time. You will see a second mouse pointer which is always confined to the limits of the VM window.

You activate the VM by clicking inside it. By default, this is the right Ctrl key on your keyboard. On a Mac host, the default Host key is the left Command key. The current setting for the Host key is always displayed at the bottom right of your VM window. Your keyboard is owned by the VM if the VM window on your host desktop has the keyboard focus. If you have many windows open in your guest OS, the window that has the focus in your VM is used.

This means that if you want to enter text within your VM, click on the title bar of your VM window first. To release keyboard ownership, press the Host key.

As explained above, this is typically the right Ctrl key. For technical reasons it may not be possible for the VM to get all keyboard input even when it does own the keyboard. Your mouse is owned by the VM only after you have clicked in the VM window. The host mouse pointer will disappear, and your mouse will drive the guest’s pointer instead of your normal mouse pointer.

Note that mouse ownership is independent of that of the keyboard. Even after you have clicked on a titlebar to be able to enter text into the VM window, your mouse is not necessarily owned by the VM yet.

These tools make VM keyboard and mouse operations much more seamless. Most importantly, the Guest Additions suppress the second “guest” mouse pointer and make your host mouse pointer work directly in the guest. Some OSes expect certain key combinations to initiate certain procedures. The recipient of these keypresses depends on a number of factors, including the key combination itself.

Host OSes reserve certain key combinations for themselves. As the X server intercepts this combination, pressing it will usually restart your host graphical user interface and kill all running programs, including Oracle VM VirtualBox, in the process. If, instead, you want to send these key combinations to the guest OS in the virtual machine, you will need to use one of the following methods:. Use the items in the Input , Keyboard menu of the virtual machine window.

However, the latter setting affects only Linux guests or Oracle Solaris guests. This menu also includes an option for inserting the Host key combination. Use special key combinations with the Host key, which is normally the right Control key. This is a global setting for all virtual machines and can be found under File , Preferences , Input. A soft keyboard can be used to input key combinations in the guest.

While a virtual machine is running, you can change removable media in the Devices menu of the VM’s window. But as the Settings dialog is disabled while the VM is in the Running or Saved state, the Devices menu saves you from having to shut down and restart the VM every time you want to change media. Using the Devices menu, you can attach the host drive to the guest or select a floppy or DVD image, as described in Section 3. You can resize the VM’s window while that VM is running.

When you do, the window is scaled as follows:. If you have scaled mode enabled, then the virtual machine’s screen will be scaled to the size of the window.

This can be useful if you have many machines running and want to have a look at one of them while it is running in the background. Alternatively, it might be useful to enlarge a window if the VM’s output screen is very small, for example because you are running an old OS in it. The aspect ratio of the guest screen is preserved when resizing the window.

To ignore the aspect ratio, press Shift during the resize operation. See Chapter 14, Known Limitations for additional remarks. If you have the Guest Additions installed and they support automatic resizing , the Guest Additions will automatically adjust the screen resolution of the guest OS.

For example, if you are running a Windows guest with a resolution of x pixels and you then resize the VM window to make it pixels wider, the Guest Additions will change the Windows display resolution to x Otherwise, if the window is bigger than the VM’s screen, the screen will be centered.

If it is smaller, then scroll bars will be added to the machine window. When you click on the Close button of your virtual machine window, at the top right of the window, just like you would close any other window on your system, Oracle VM VirtualBox asks you whether you want to save or power off the VM.

Save the machine state: With this option, Oracle VM VirtualBox freezes the virtual machine by completely saving its state to your local disk. When you start the VM again later, you will find that the VM continues exactly where it was left off. All your programs will still be open, and your computer resumes operation.

Saving the state of a virtual machine is thus in some ways similar to suspending a laptop computer by closing its lid. Send the shutdown signal. This will send an ACPI shutdown signal to the virtual machine, which has the same effect as if you had pressed the power button on a real computer.

This should trigger a proper shutdown mechanism from within the VM. Power off the machine: With this option, Oracle VM VirtualBox also stops running the virtual machine, but without saving its state. This is equivalent to pulling the power plug on a real computer without shutting it down properly. If you start the machine again after powering it off, your OS will have to reboot completely and may begin a lengthy check of its virtual system disks.

As a result, this should not normally be done, since it can potentially cause data loss or an inconsistent state of the guest system on disk. As an exception, if your virtual machine has any snapshots, see Section 1. In that case, powering off the machine will not disrupt its state, but any changes made since that snapshot was taken will be lost.

The Discard button in the VirtualBox Manager window discards a virtual machine’s saved state. This has the same effect as powering it off, and the same warnings apply. VM groups enable the user to create ad hoc groups of VMs, and to manage and perform functions on them collectively, as well as individually. Select multiple VMs and select Group from the right-click menu. This command creates a group “TestGroup” and attaches the VM “vm01” to that group. Detach a VM from the group, and delete the group if empty.

For example:. This command detaches all groups from the VM “vm01” and deletes the empty group. This command creates the groups “TestGroup” and “TestGroup2”, if they do not exist, and attaches the VM “vm01” to both of them. With snapshots, you can save a particular state of a virtual machine for later use. At any later time, you can revert to that state, even though you may have changed the VM considerably since then. A snapshot of a virtual machine is thus similar to a machine in Saved state, but there can be many of them, and these saved states are preserved.

To see the snapshots of a virtual machine, click on the machine name in VirtualBox Manager. Then click the List icon next to the machine name, and select Snapshots. Until you take a snapshot of the machine, the list of snapshots will be empty except for the Current State item, which represents the “now” point in the lifetime of the virtual machine. Take a snapshot. This makes a copy of the machine’s current state, to which you can go back at any given time later. The snapshots window is shown.

Do one of the following:. Click the Take icon. Right-click on the Current State item in the list and select Take. In either case, a window is displayed prompting you for a snapshot name.

This name is purely for reference purposes to help you remember the state of the snapshot. For example, a useful name would be “Fresh installation from scratch, no Guest Additions”, or “Service Pack 3 just installed”.

You can also add a longer text in the Description field. Your new snapshot will then appear in the snapshots list. Underneath your new snapshot, you will see an item called Current State , signifying that the current state of your VM is a variation based on the snapshot you took earlier. If you later take another snapshot, you will see that they are displayed in sequence, and that each subsequent snapshot is derived from an earlier one.

Oracle VM VirtualBox imposes no limits on the number of snapshots you can take. The only practical limitation is disk space on your host. Each snapshot stores the state of the virtual machine and thus occupies some disk space.

Restore a snapshot. In the list of snapshots, right-click on any snapshot you have taken and select Restore. By restoring a snapshot, you go back or forward in time.

The current state of the machine is lost, and the machine is restored to the exact state it was in when the snapshot was taken. Restoring a snapshot will affect the virtual hard drives that are connected to your VM, as the entire state of the virtual hard drive will be reverted as well.

This means also that all files that have been created since the snapshot and all other file changes will be lost. In order to prevent such data loss while still making use of the snapshot feature, it is possible to add a second hard drive in write-through mode using the VBoxManage interface and use it to store your data.

As write-through hard drives are not included in snapshots, they remain unaltered when a machine is reverted. To avoid losing the current state when restoring a snapshot, you can create a new snapshot before the restore operation. By restoring an earlier snapshot and taking more snapshots from there, it is even possible to create a kind of alternate reality and to switch between these different histories of the virtual machine.

This can result in a whole tree of virtual machine snapshots, as shown in the screenshot above. Delete a snapshot. This does not affect the state of the virtual machine, but only releases the files on disk that Oracle VM VirtualBox used to store the snapshot data, thus freeing disk space.

To delete a snapshot, right-click on the snapshot name in the snapshots tree and select Delete. Snapshots can be deleted even while a machine is running. Whereas taking and restoring snapshots are fairly quick operations, deleting a snapshot can take a considerable amount of time since large amounts of data may need to be copied between several disk image files.

Temporary disk files may also need large amounts of disk space while the operation is in progress. There are some situations which cannot be handled while a VM is running, and you will get an appropriate message that you need to perform this snapshot deletion when the VM is shut down. Think of a snapshot as a point in time that you have preserved.

More formally, a snapshot consists of the following:. The snapshot contains a complete copy of the VM settings, including the hardware configuration, so that when you restore a snapshot, the VM settings are restored as well.

For example, if you changed the hard disk configuration or the VM’s system settings, that change is undone when you restore the snapshot. The copy of the settings is stored in the machine configuration, an XML text file, and thus occupies very little space.

The complete state of all the virtual disks attached to the machine is preserved. Going back to a snapshot means that all changes that had been made to the machine’s disks, file by file and bit by bit, will be undone as well.

Files that were since created will disappear, files that were deleted will be restored, changes to files will be reverted. Strictly speaking, this is only true for virtual hard disks in “normal” mode. You can configure disks to behave differently with snapshots, see Section 5.

In technical terms, it is not the virtual disk itself that is restored when a snapshot is restored. Instead, when a snapshot is taken, Oracle VM VirtualBox creates differencing images which contain only the changes since the snapshot were taken. When the snapshot is restored, Oracle VM VirtualBox throws away that differencing image, thus going back to the previous state. This is both faster and uses less disk space.

For the details, which can be complex, see Section 5. Creating the differencing image as such does not occupy much space on the host disk initially, since the differencing image will initially be empty and grow dynamically later with each write operation to the disk. The longer you use the machine after having created the snapshot, however, the more the differencing image will grow in size.

If you took a snapshot while the machine was running, the memory state of the machine is also saved in the snapshot. This is in the same way that memory can be saved when you close a VM window. When you restore such a snapshot, execution resumes at exactly the point when the snapshot was taken. The memory state file can be as large as the memory size of the VM and will therefore occupy considerable disk space. When you select a virtual machine from the list in the VirtualBox Manager window, you will see a summary of that machine’s settings on the right.

Clicking on Settings displays a window, where you can configure many of the properties of the selected VM. But be careful when changing VM settings. It is possible to change all VM settings after installing a guest OS, but certain changes might prevent a guest OS from functioning correctly if done after installation. This is because the Settings dialog enables you to change fundamental characteristics of the virtual machine that is created for your guest OS.

For example, the guest OS may not perform well if half of its memory is taken away. As a result, if the Settings button is disabled, shut down the current VM first. Oracle VM VirtualBox provides a wide range of parameters that can be changed for a virtual machine. The various settings that can be changed in the Settings window are described in detail in Chapter 3, Configuring Virtual Machines.

Even more parameters are available when using the VBoxManage command line interface. Removing a VM. The confirmation dialog enables you to specify whether to only remove the VM from the list of machines or to remove the files associated with the VM. Note that the Remove menu item is disabled while a VM is running. Moving a VM. Note that the Move menu item is disabled while a VM is running.

You can create a full copy or a linked copy of an existing VM. This copy is called a clone. The Clone Virtual Machine wizard guides you through the cloning process. Start the wizard by clicking Clone in the right-click menu of the VirtualBox Manager’s machine list or in the Snapshots view of the selected VM.

Specify a new Name for the clone. You can choose a Path for the cloned virtual machine, otherwise Oracle VM VirtualBox uses the default machines folder. The Clone Type option specifies whether to create a clone linked to the source VM or to create a fully independent clone:.

Full Clone: Copies all dependent disk images to the new VM folder. A full clone can operate fully without the source VM. Linked Clone: Creates new differencing disk images based on the source VM disk images. The Snapshots option specifies whether to create a clone of the current machine state only or of everything. Everything: Clones the current machine state and all its snapshots. Current Machine State and All Children:.

Clones a VM snapshot and all its child snapshots. This is the default setting. This is the best option when both the source VM and the cloned VM must operate on the same network.

It may be an easier approach than the accepted answer, but it requires an additional Mac with an older version of macOS, and – at least in my case – an older version of VMware Fusion. That said, here goes:. Here’s an “official source” for this file on Apple’s website. Follow the guided process:. When the process has completed, you will see the new VM listed, and you may select it, and start it.

The VM will start in a new window. Finally, copy the. Once you have the file positioned where you want it, right-click on it, and select the option to open the file with VMware Fusion. That’s it. I’m considering writing an Epilogue to this saga to document some of the road-blocks encountered, and my questions regarding why this process was made so difficult.

That’s for another day – I’m officially burned out on Catalina and VMware for now. However, I need to say that I have not actually worked through the entire procedure given in that answer.

I previously created an alternative approach first alternative approach to the accepted answer which is here. This answer – the one that follows – is a second alternative approach for meeting the objective:. Note: This may be an easier approach than the accepted answer. It may also be easier than this earlier alternative answer as it does not require an additional Mac with an older version of macOS. The following procedure can be completed from the target macOS Catalina The script will ask: Do you also want an.

Reply to the prompt from the keyboard with: 1 return. The script will post its progress to the Terminal window, ending successfully with this:. You will be prompted for location, language, etc – same as when you set up macOS on a new machine.

The entire process took about minutes on on my Macbook Pro. Sign up to join this community. The best answers are voted up and rise to the top. Stack Overflow for Teams — Start collaborating and sharing organizational knowledge.

Create a free Team Why Teams? Learn more about Teams. Asked 2 years, 1 month ago. Modified 1 year, 4 months ago. Viewed 2k times. How Should I Proceed? Improve this question. Seamus Seamus 3, 2 2 gold badges 14 14 silver badges 32 32 bronze badges. The macOSUpdCombo Install macOS High Sierra.

Is there some reason you do not just create a macOS High Sierra virtual machine and then use Migration Assistant to move User Data and Applications from the physical machine to the virtual machine? But that’s the problem You do not need any third-party utilities to do any of this! It’s really just that simple! Authentication support includes preshared keys, certificates, and user authentication via the Extensible Authentication Protocol EAP.

The following are required:. The Android Release 4. Secure Firewall ASA versions 8. Such OSs are collectively referred to as NT servers. They support no more than character user passwords. Cisco supports the Microsoft client; the respective vendors support the other clients. Skip to content Skip to search Skip to footer.

Log in to Save Content. Available Languages. Download Options. Updated: July 20, Bias-Free Language. Bias-Free Language The documentation set for this product strives to use bias-free language. The following table identifies the minimum versions of Cisco Secure Client,including AnyConnect, that are required for the Cisco Secure Firewall ASA and Adaptive Security Device Manager releases: Note Although versions other than those listed below may work, Cisco is not claiming support or full testing, and fixes will be performed only on currently supported products.

Cisco Secure Desktop was deprecated in April AnyConnect 3. Note Javascript and cookies must be enabled on all browsers. With ASA version 9. Support for Microsoft SharePoint and has been depracated in 9. Support foe Microsoft Outlook Web Access and has been depracated in 9. Supported in 9.

Citrix XenDesktop Version 5 to 5. Smart Tunnel Notes Smart tunnel supports all applications not supported by the core rewriter. OS X Requires a Chrome extension. Smart tunnel support on Chrome is as follows: Chrome’s default download location needs to point to the current user’s Downloads folder.

Supported on Windows 7,8 and 10, both bit and bit versions. Supported on Mac OS X WebFolder has been superseded by Java file browser. There is no WebSocket support through rewriting. Smart tunnel requires Active X or Java enabled browsers. VMware View 4 Smart Tunnel Smart tunnel supports all applications not supported by the core rewriter.

You cannot use an application to create a variable that points to the WebSocket object and then uses it to establish the connection.

WebSocket; new WS x,y ;. Used only to install ISE Posture not supported not supported Windows 8. Although versions other than those listed above may work, Cisco has not performed full testing on any version other than those listed. Operating System Version Windows Windows 8.

The following are required: Mobile devices must be using the Android 2. Was this Document Helpful? Yes No Feedback. AnyConnect 2. Javascript and cookies must be enabled on all browsers. Win 4. Windows Mobile 5. Citrix Receiver for iOS 6. Citrix Receiver for Android 3. Depracated in 9. Windows 7 SP1 Note. SP1 required for 9. Windows 7 Note.